Key Features
Overview
The Kreg KMS7520 Track Clamps are a two-piece clamping accessory made for Kreg guide track systems and related clamping tracks. This is a track clamp set designed for securing guide tracks and shop jigs during cutting and layout work. Model Number: KMS7520. If you use an Accu-Cut setup. an Adaptive Cutting System guide track. or Kreg Clamp Trak in the shop. these clamps give you a simple way to keep things from moving when accuracy matters.
What makes these useful is not just that they clamp. but where they clamp. They attach to the track slot so the top of your work area stays clear. That is a real advantage when you are guiding a circular saw across plywood. trimming panels. or setting up fixtures where a standard clamp would get in the way. The result is better track stability without fighting around bulky clamp heads on top of the material.
Kreg also built these to work across more than one system. According to the product data. they are suitable for use with Accu-Cut. Accu-Cut XL. the Accu-Cut Expansion Pack. and the Adaptive Cutting System Guide Track. They also work with Kreg Clamp Trak. Universal Clamp Trak Kits. and Mini Trak. That gives them value beyond a single saw guide setup. If you already use Kreg track-based accessories in your shop. these can pull double duty for cutting. jig building. and fixture work.
The design is straightforward. which is exactly what you want in an accessory like this. The clamp body slides into the track slot. then tightens down with threaded hardware to apply holding force where you need it. There is no extra complexity here. and that is a good thing. For workholding accessories. dependable fit and easy adjustment matter more than gimmicks. The listed material construction from supplementary product data includes aluminum. steel. and plastic polymer. which makes sense for a clamp that needs a mix of rigidity. threaded strength. and easy handling.
On the job or in the shop. the biggest benefit is cut control. When you are breaking down sheet goods. even a little track movement can cost you a straight edge or force a reset. These clamps are there for the moments when friction strips alone are not enough. when you are working near an edge. or when you need the guide track locked in place on a slick or awkward surface. They also attach easily to track extensions and the Starting Block when clamping is needed. which makes them more versatile for longer cuts and expanded setups.
This set is a good fit for woodworkers. cabinet installers. finish carpenters. and serious DIY users who rely on Kreg guide tracks for cleaner. more controlled circular saw cutting. It also makes sense for anyone building shop-made jigs and fixtures around Kreg Clamp Trak or Mini Trak. If you already own the guide system. this is one of those accessories that helps you get more out of it and spend less time chasing movement in the middle of a cut.
Hold the Guide Track Where You Put It
When a guide track shifts. cut quality goes with it. These track clamps are made to anchor the track from underneath so you can keep the top side clear and focus on the cut. not on holding everything in place by hand.
- Slides into the track slot for extra holding power during sheet goods cutting and jig setup
- Useful with track extensions and the Starting Block when your setup needs more stability
- Also works with Kreg Clamp Trak. Universal Clamp Trak Kits. and Mini Trak for shop fixtures and repeat setups
What’s in the Box
- (2) Clamp Bodies
- (2) Mounting Bolts with washers
- (2) Threaded Knobs
- (2) Knurled Locking Nuts
Key Specifications
| Piece Count | 2 clamps |
|---|---|
| Product Type | Track clamps |
| Material | Aluminum. steel. plastic polymer |
| Dimensions (L x W x H) | 3 x 1.75 x 4.5 in |
| Weight | 1.0 lb |
| Model Number | KMS7520 |
Compatibility
Built For
Pro Tip
If you are using track extensions or working near the end of a long guide setup. add these clamps before you start your cut. That extra hold helps keep the track from creeping when you are pushing a saw across full sheets.
Tool Nut’s Take
Kreg KMS7520 Track Clamps are the kind of accessory that makes the whole system work better
If you already use Kreg guide tracks or Clamp Trak parts. this is a smart add-on that gives you more control with almost no learning curve.
- Who it’s for: Woodworkers. cabinet guys. and DIY users who want a more secure guide track setup for panel cutting. jig work. and repeatable shop tasks.
- Why it stands out: It fits multiple Kreg track-based systems. keeps the top of the work surface clear. and gives you a clean way to add holding power right where the track needs it.
- Worth knowing: This is an accessory. not a standalone cutting system. It is most valuable for users already working in the Kreg track ecosystem.
Common Questions
- What does this product do? It is a track clamp set that secures compatible Kreg guide tracks and clamping tracks to help prevent movement during cutting or fixture setup.
- Which Kreg systems does it fit? The source data lists compatibility with Accu-Cut. Accu-Cut XL. Accu-Cut Expansion Pack. Adaptive Cutting System Guide Track. Clamp Trak. Universal Clamp Trak Kits. and Mini Trak.
- Can it be used for more than saw guide tracks? Yes. The product data specifically says it is handy for creating shop-made jigs and fixtures.
- Is this sold as a single clamp or a pair? It includes two track clamps.
