Key Features
Overview
The Klein Tools 14-in-1 Impact Rated Flip Socket Set. model 32914HD. is a multi-bit nut driver and flip socket set built for fastener work with an impact driver. This is a flip socket set designed for fastening and impact driving. If you are moving between common nut sizes on electrical gear. mechanical installs. sheet metal. or general jobsite hardware. this setup cuts down tool changes without giving up impact-rated strength.
What makes this set useful is how much it puts in one hand. You get 12 integrated hex sizes covering SAE sizes 1/4 inch. 5/16 inch. 3/8 inch. 7/16 inch. 1/2 inch. and 9/16 inch. plus metric sizes 7 millimeters. 8 millimeters. 10 millimeters. 12 millimeters. 13 millimeters. and 14 millimeters. On top of that. the tool adds a bit holding feature and a built-in wrench assist. which is where the 14-in-1 count comes from. For anyone who bounces between standard and metric hardware. that mix is the real time-saver.
The design is clearly aimed at jobsite efficiency. Klein built in-handle storage so two sets of flip sockets can be stored on the tool. with one set fully housed inside the handle. That means fewer loose sockets rolling around in a pouch or van drawer. The sockets are also color-coded. so you can identify the right size quickly instead of reading every marking when you are on a ladder or working in poor light.
There is some thoughtful detail here beyond simple storage. The sockets can be arranged on the shaft in any order or orientation. so you can set the tool up around the sizes you use most. The built-in wrench assist gives you another way to add torque when a fastener is stubborn. Klein also uses a powerful -earth magnet to hold hex fasteners securely. which helps when you need one-handed fastening and do not want the screw or nut dropping before it starts.
From a build standpoint. the set uses steel alloy construction with a manganese phosphate finish. That combination fits the job: impact-rated durability with a finish intended for hard use. The Cushion-Grip handle is there for comfort. but more importantly it gives you better control when you are using the tool by hand or making quick changes between sizes. At 10.92 inches overall length. it gives you some reach without turning into an awkward specialty piece.
This flip socket set is designed specifically for use with impact drivers and uses a 1/4 inch drive interface. It is a strong fit for electricians. HVAC techs. maintenance crews. panel builders. metal building installers. and general contractors who run a lot of hex-head fasteners. Serious DIY users will also appreciate it. but the real value shows up when you are working out of a pouch and need one compact impact driver accessory that replaces a pile of separate nut drivers and sockets.
Keep Common Sizes on the Tool
This setup is about cutting wasted motion. Instead of carrying a pile of individual nut drivers. you have a single impact driver socket set that keeps a wide spread of common sizes in one organized tool.
- Includes 12 integrated hex sizes in both SAE and metric
- Adds a bit holding feature and built-in wrench assist for more versatility
Storage That Stays With You
The in-handle storage is the feature that separates this tool from a basic socket stick. One set stores inside the handle. so the sizes you need are less likely to go missing between jobs.
- Stores two sets of flip sockets on the tool
- One set is fully housed within the handle for a cleaner carry
Get a More Secure Start
A strong magnet sounds small until you are starting hardware overhead or reaching into a tight cabinet. The -earth magnet helps keep the fastener where it belongs while you line up the shot.
- -earth magnet helps hold hex fasteners securely
- Useful for one-handed fastening and awkward access points
What’s in the Box
- (1) Cushion-Grip handle
- (1) Adapter
- (1) SAE flip socket set with sizes 1/4 inch. 5/16 inch. 3/8 inch. 7/16 inch. 1/2 inch. and 9/16 inch
- (1) Metric flip socket set with sizes 7 millimeters. 8 millimeters. 10 millimeters. 12 millimeters. 13 millimeters. and 14 millimeters
- (1) Bit holding feature
- (1) Built-in wrench assist
Key Specifications
| Material | Steel alloy |
|---|---|
| Finish | Manganese phosphate |
| Drive Size | 1/4 in. |
| Socket Points | 6-point |
| Measure Type | Metric and SAE |
| Overall Length | 10.92 in. |
| Weight | 1.32 lbs |
| Total Functions | 14-in-1 |
Compatibility
Built For
Pro Tip
Set the sockets on the shaft in the order you actually use them instead of leaving them factory-stacked. If you bounce between one or two common sizes all day. that small change makes this flip socket set noticeably faster.
Warranty & Support
Tool Nut’s Take
Klein Tools 14-in-1 Impact Rated Flip Socket Set is the kind of problem-solver you actually keep using
It gives you a lot of the sizes you reach for most in one impact-ready setup that stays organized better than most multi-size socket tools.
- Who it’s for: Pros and serious DIY users who run hex fasteners with an impact driver and want fewer loose sockets in the pouch.
- Why it stands out: The in-handle storage. color-coded sizing. -earth magnet. and built-in wrench assist make it more thought-out than a basic impact socket set.
- Worth knowing: This is a specialized fastening tool. not a full mechanic’s socket kit. If your work lives around common installation hardware. it makes a lot more sense than carrying individual pieces.
Common Questions
- Is this set made for impact drivers? Yes. It is specifically described as an impact-rated socket set designed for use with impact drivers.
- Does it include both SAE and metric sizes? Yes. It includes six SAE sizes and six metric sizes.
- How does it reach 14-in-1? The tool combines 12 integrated hex sizes plus a bit holding feature and a built-in wrench assist.
- Does it help hold fasteners in place? Yes. A -earth magnet is built in to securely hold hex fasteners for one-handed fastening.
